将变速杆拨各个档位，检查档位指示灯与变速杆位置是否一致，如有异常，应调节空档起动开关螺栓和开关电路。
Turn the shift lever to each gear, check whether the gear indicator is consistent with the shift lever position. If there is any abnormality, adjust the bolt and switch circuit of the neutral start switch.
将变速杆拨各个档位，检查档位指示灯与变速杆位置是否一致、P位和N位时发动机能否起动，R位时倒档灯是否亮起。发动机应只能在空档（N档）和驻车档（P档）起动，其他档位不能起动，若有异常，应调节空档起动开关螺栓和开关电路。
Turn the shift lever to each gear, check whether the gear indicator is consistent with the shift lever position, whether the engine can start at P and N positions, and whether the reverse light is on at R position. The engine can only be started in neutral (n gear) and Park (P gear), and other gears can not be started. If there is any abnormality, adjust the bolt of neutral start switch and switch circuit.
1）松开档位开关的固定螺钉，将变速杆置于N档位。
1) Loosen the fixing screw of the gear switch and put the shift lever in the N position.
2）将槽口对准空档基准线。有些自动变速器的档位开关外壳上刻有一条基准线，调整时应将基准线和手动阀摇臂轴上的槽口对齐，也有一些自动变速器的档位开关上有一个定位孔，调整时应使摇臂上的定位孔和档位开关上的定位孔对准。
2) Align the notch with the neutral reference line. There is a reference line engraved on the gear switch housing of some automatic transmissions. When adjusting, the reference line should be aligned with the notch on the rocker arm shaft of the manual valve. In some automatic transmissions, there is a positioning hole on the shift switch. During adjustment, the positioning hole on the rocker arm should be aligned with the positioning hole on the gear switch.
3）档位开关的位置调好后进行固定。
3) The position of the gear switch is adjusted and fixed.
The highlights of this issue are compiled by Jinan Benz automobile maintenance editor. Thank you for your reading. If there is anything wrong, please visit our official website: www.lutongqixiu.com Leave us a comment and we will give you a satisfactory reply
